ADATA SX6000PNP
User Benchmarks
Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
ADATA SX6000PNP | 512 | 1852 | 751 | 672 | 211.15 | 98.91 | 0.18 | 0.18 |
The measurement of the ADATA SX6000PNP was carried out on Windows. Similar read and write speeds could certainly be achieved with the ADATA SX6000PNP under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the ADATA SX6000PNP should be used.
The ADATA SX6000PNP is an M.2 NVMe Solid-State Drive (SSD) manufactured by ADATA. Designed for high performance and efficiency, this SSD provides a fast and reliable storage solution for modern computers and other devices. Here is a detailed description of the ADATA SX6000PNP, including technical details, features and application areas:
Technical Details
1. Model and Manufacturer:
- Model: ADATA SX6000PNP
- Manufacturer: ADATA Technology Co., Ltd.
2. Capacity:
- Storage Capacity: Typically available in sizes such as 256GB, 512GB, and 1TB. The specific capacity will depend on the model you purchase.
3. Interface:
- Type: M.2 2280
- Protocol: NVMe (Non-Volatile Memory Express) over PCIe (Peripheral Component Interconnect Express) 3.0 x4
4. Form Factor:
- Size: M.2 2280, which is 22mm wide and 80mm long. This is the most common form factor for modern M.2 NVMe SSDs.
5. Performance:
- Read speed: Up to 2100 MB/s
- Write speed: Up to 1500 MB/s
- Random reads: Up to 170,000 IOPS (Input/Output Operations Per Second)
- Random writes: Up to 150,000 IOPS
6. Memory Chip Technology:
- Type: 3D NAND Flash
- Technology: Triple-Level Cell (TLC), which offers a good compromise between cost, performance, and durability.
7. Cache Memory:
- Type: DRAM cache may not be present in this model, meaning it relies on SLC cache or other techniques to improve performance.
8. Power Consumption:
- Power Consumption: Typically low, as NVMe SSDs are often more power efficient than traditional SATA SSDs.
9. MTBF (Mean Time Between Failures):
- MTBF: Around 1.5 million hours, which means high reliability.
10. Lifespan:
- TBW (Total Bytes Written): The amount of data that can be written in total before the SSD potentially fails. This varies by capacity and model, but is sufficient for most applications.
Features
1. High Performance:
- Speed: The ADATA SX6000PNP offers high read and write speeds that significantly accelerate operating system booting, application loading, and large file transfers.
- Random IOPS: High IOPS rates improve performance during simultaneous read and write operations, which is beneficial for multitasking and fast data processing.
2. NVMe Protocol:
- Efficiency: The NVMe protocol enables fast communication between the SSD and the CPU, resulting in lower latency and higher data transfer rates compared to SATA-based SSDs.
3. Energy Efficiency:
- Power Consumption: The SSD has low power consumption, making it ideal for mobile devices such as laptops and helping to extend battery life.
4. Heat Dissipation:
- Thermal Management: The SSD is equipped with technologies that ensure efficient heat dissipation to avoid overheating and related performance degradation.
5. Reliability:
- Error Correction: Built-in error correction technologies ensure high data integrity and protection against data loss.
6. Ease of Use:
- Ease of Installation: The M.2 2280 form factor allows easy installation in the corresponding slots on the motherboard of computers.
Application Areas
1. Desktop PCs:
- Primary Storage: Ideal as primary storage for desktop PCs to improve system performance through fast boot and loading times.
- Upgrade: Perfect for upgrading an existing system to boost performance and increase overall speed.
2. Laptops:
- System Drive: Works well as a system drive for laptops as its high speed makes booting and running applications faster while minimizing power consumption.
3. Gaming:
- Fast Loading Times: Reduces loading times in games and increases responsiveness, resulting in a better gaming experience.
4. Creative Professionals:
- Data Intensive Applications: Useful for creative applications that handle large amounts of data such as video editing, 3D modeling, and rendering.
5. Servers and Workstations:
- Performance Optimization: Improves performance in servers and workstations by providing fast data access times for applications and database queries.
6. External Storage Solutions:
- External Enclosure: Can be installed in an external M.2 enclosure to provide portable, fast storage.
Important Considerations
- Compatibility: Check if your computer or laptop has an M.2 2280 slot and that it supports the NVMe protocol standard. There are different M.2 slot types and protocols, so it is important to confirm compatibility.
- Capacity: Choose the capacity based on your storage needs. While 256GB or 512GB may be enough for many users, others may need 1TB or more.
- Cooling: With intensive use, it may be helpful to consider additional cooling or a heatsink for the SSD to maintain optimal performance.
The ADATA SX6000PNP offers a powerful and efficient solution for modern storage needs. Its combination of fast performance, energy efficiency and ease of use makes it an excellent choice for a wide range of applications, from everyday tasks to professional needs.
---
ADATA SX6000PNP and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of ADATA SX6000PNP.
The ADATA SX6000PNP is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the ADATA SX6000PNP regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.