BC501 NVMe SK hynix 256GB
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| BC501 NVMe SK hynix 256GB | 256 | 1630 | 1101 | 250 | 32.20 | 101.33 | 0.11 | 0.04 |
| BC501 NVMe SK hynix 256GB | 256 | 1324 | 679 | 302 | 141.30 | 100.53 | 0.13 | 0.07 |
The measurement of the BC501 NVMe SK hynix 256GB was carried out on Windows. Similar read and write speeds could certainly be achieved with the BC501 NVMe SK hynix 256GB under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the BC501 NVMe SK hynix 256GB should be used.
The SK hynix BC501 NVMe SSD 256GB is a powerful and compact solid-state drive (SSD) suitable for various applications. Here are the details of this model:
1. Description
The SK hynix BC501 NVMe SSD is a storage drive that uses the NVMe (Non-Volatile Memory Express) interface and is designed in an M.2 2280 form factor. The BC501 series from SK hynix is ​​designed for use in high-performance computing environments that require fast data transfer rates and high reliability.
2. Technical details
- Form factor: M.2 2280
- Size: 22mm x 80mm. This form factor is the common standard for NVMe SSDs and allows for a compact design that fits into most modern laptops and desktops.
- Interface: NVMe 1.3
- Protocol: NVMe (Non-Volatile Memory Express), which provides a direct connection to the PCIe (Peripheral Component Interconnect Express) bus and enables faster data transfer rates compared to older SATA SSDs.
- Storage technology: 3D NAND Flash
- Type: TLC (Triple-Level Cell) - This technology stores three bits per memory cell and offers a good cost-to-capacity and performance ratio.
- Capacity: 256GB
- This is a typical capacity for entry-level or budget systems, sufficient for basic applications and operating system installations.
- Perfomance:
- Maximum read rate: Up to 1,800 MB/s
- Maximum write rate: Up to 1,400 MB/s
- Actual performance may vary depending on system configuration and specific applications.
- Energy consumption:
- Operation mode: Energy efficiency is higher compared to older hard drives and SATA SSDs, with low power consumption at idle and under load.
- MTBF (Mean Time Between Failures): Typically over 1,500,000 hours
- This gives an indication of the reliability and expected lifespan of the drive.
- TBW (Terabytes Written): Approximately 150 TBW
- This shows the total amount of data that can be written over the lifetime of the drive.
3. Functions
- DRAM-less Design: The BC501 SSD uses a DRAM-less design, which means there is no separate DRAM cache chip. Instead, the flash memory is directly addressed, which reduces cost but may slightly impact performance on certain writes.
- SLC Caching: The SSD uses SLC (Single-Level Cell) caching to improve performance during write operations. This means that a portion of the TLC memory is used as a faster SLC cache.
- Advanced Error Correction: The BC501 uses ECC (Error-Correcting Code) to ensure the integrity of the stored data and correct possible errors during transmission or storage.
- Compatibility with major operating systems: Supports Windows, macOS and Linux systems.
4. Areas of application
- System Upgrade: Ideal for users who want to upgrade their PC or laptop to benefit from fast NVMe speeds, especially on devices that support M.2 NVMe ports.
- Everyday use: For everyday tasks such as web browsing, office applications and multimedia usage where fast performance is required.
- Gaming: Improved loading times and overall system responsiveness in games, especially useful when the system needs to frequently read or write data from the SSD.
- Content Creation: Suitable for applications such as image editing or video editing, where the fast read and write speeds of the SSD offer advantages.
5. Installation
- Connection: The BC501 is inserted into the M.2 2280 slot of the motherboard and secured with a screw. Installation is relatively simple and usually takes place without additional driver installation, as modern operating systems should automatically recognize the SSD.
- Drivers: In most cases, no special drivers are required as NVMe SSDs are supported by default in current operating systems.
6. Maintenance and care
- Firmware Updates: It is advisable to regularly visit the SK hynix website to download firmware updates for the SSD. These updates can improve the performance and reliability of the drive.
- Health Monitoring: Use tools like SK hynix SSD Tool to monitor drive health, query lifespan, and perform diagnostic tests.
Overall, the SK hynix BC501 NVMe SSD 256GB offers a cost-effective way to significantly improve the performance of a system. With fast data transfer rates and a compact design, it is well suited for a wide range of applications, from everyday tasks to demanding computing needs.
---
BC501 NVMe SK hynix 256GB and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of BC501 NVMe SK hynix 256GB.
The BC501 NVMe SK hynix 256GB is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the BC501 NVMe SK hynix 256GB regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.