CT500P3PSSD8
User Benchmarks
Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
CT500P3PSSD8 | 500 | 4477 | 2381 | 1721 | 152.81 | 63.80 | 0.15 | 0.04 |
CT500P3PSSD8 | 500 | 3341 | 2429 | 911 | 0.00 | 0.00 |
The measurement of the CT500P3PSSD8 was carried out on Windows. Similar read and write speeds could certainly be achieved with the CT500P3PSSD8 under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the CT500P3PSSD8 should be used.
The CT500P3PSSD8 is a 500GB NVMe SSD from Crucial known for its high performance and reliability. This SSD is part of the Crucial P3 Plus series and is designed for use in desktop computers, laptops, and other devices that offer NVMe support. Here is a comprehensive description of the CT500P3PSSD8, including technical details, features, and application areas:
Technical details
1. Capacity:
- Storage capacity: 500 GB
- This capacity is suitable for storing operating systems, applications and personal data. 500 GB offers a good balance between sufficient storage space and cost.
2. Interface:
- NVMe (Non-Volatile Memory Express): The SSD uses the NVMe interface via the M.2 2280 form factor. NVMe enables significantly higher speeds and lower latency compared to SATA SSDs because it communicates directly via the PCIe bus.
3. Form factor:
- M.2 2280: The M.2 2280 form factor is the standard for many modern SSDs. Measuring 80mm long and 22mm wide, this form factor fits most modern laptops and desktop motherboards that support an M.2 slot.
4. Memory chip type:
- TLC (Triple-Level Cell) NAND Flash: The SSD uses TLC NAND flash memory, which stores three bits per cell. TLC offers a good balance between capacity, cost and performance, but is slightly slower and less durable than SLC (Single-Level Cell) and MLC (Multi-Level Cell).
5. Controller:
- In-house NVMe Controller: Crucial uses an internal NVMe controller that is responsible for managing the data and optimizing the performance of the SSD. The controller ensures fast read and write operations and efficient data management.
6. Read and write speed:
- Maximum sequential read speed: Up to 5000 MB/s
- Maximum sequential write speed: Up to 4200 MB/s
- These speeds are significantly faster than SATA SSDs and provide improved performance in data transfer, system boot times and applications.
7. Access times:
- Random Read/Write: The SSD provides high IOPS (Input/Output Operations Per Second) for random read and write operations, which contributes to faster program execution and more efficient multitasking. Exact IOPS values ​​vary by model and usage.
8. TBW (Terabytes Written):
- Endurance: The TBW value indicates how many terabytes of data can be written to the SSD before durability degrades significantly. For the CT500P3PSSD8, this value is typically around 300 TBW, which is a solid endurance for most user applications.
9. Temperature range:
- Operating and Storage Temperature: The SSD can typically operate at operating temperatures from 0°C to 70°C and be stored at storage temperatures from -40°C to 85°C. These temperatures ensure reliable performance under various conditions.
Features
1. Performance:
- High data transfer rates: With read and write speeds of up to 5000 MB/s and 4200 MB/s respectively, the CT500P3PSSD8 offers exceptional performance for fast boot times, rapid file transfers and smooth multitasking.
2. Energy efficiency:
- Low Power Consumption: The SSD is energy efficient, which contributes to less heat generation and longer battery life in laptops. The low power consumption also helps keep the system temperature low in desktop PCs.
3. Reliability:
- Error Correction: The SSD uses advanced error correction technologies to ensure data integrity. These technologies include ECC (Error-Correcting Code) and other data loss protection mechanisms.
4. Thermal management:
- Thermal Protection Technologies: The SSD is equipped with technologies that prevent overheating and keep performance stable under high load. This helps prevent performance degradation due to overheating.
5. TRIM support:
- Performance optimization: The SSD supports the TRIM command, which allows the operating system to delete data blocks that are no longer needed in order to optimize the performance of the SSD over time.
6. S.M.A.R.T.-Technologie:
- Monitoring and Error Diagnosis: The SSD supports SMART (Self-Monitoring, Analysis, and Reporting Technology), which is used to monitor hard drive performance and diagnose potential errors.
Scope
1. Desktop-Computer:
- Primary Drive: The CT500P3PSSD8 can be used as the primary drive for the operating system and applications. Its high performance improves overall system speed, including faster boot times and faster program launches.
2. Laptops and notebooks:
- Upgrade Solution: The SSD is ideal for use in laptops as it improves system performance and extends battery life. It is an excellent choice for users who want to upgrade an existing HDD.
3. Gaming-PCs:
- High-performance applications: The CT500P3PSSD8 is particularly suitable for gaming PCs due to its fast read and write speeds. It reduces loading times for games and offers smooth performance in demanding applications.
4. Multimedia applications:
- Video editing and graphic design: The SSD's high performance also makes it ideal for applications that require large files and fast data transfers, such as video editing, graphic design, and 3D modeling.
5. General storage solutions:
- Data and Backup Solutions: The SSD is suitable for general storage needs, including storing and backing up data, media and software.
Conclusion
The Crucial CT500P3PSSD8 is a high-performance 500GB NVMe SSD that connects via the M.2 2280 form factor. With sequential read and write speeds of up to 5000MB/s and 4200MB/s, respectively, it offers exceptional performance for a wide range of applications, including operating systems, software, gaming, and multimedia. The SSD is energy efficient, reliable, and offers advanced features such as TRIM support and SMART technology. It is ideal for use in desktop computers, laptops, gaming systems, and general storage solutions where high speed and reliability are required.
---
CT500P3PSSD8 and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of CT500P3PSSD8.
The CT500P3PSSD8 is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the CT500P3PSSD8 regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.