FUJITSU MHT2060AT
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| FUJITSU MHT2060AT | 56 | 52 | 21 | 20 | 0.45 | 0.81 | 11.48 | 5.20 |
| FUJITSU MHT2060AT | 56 | 52 | 21 | 20 | 0.45 | 0.81 | 11.48 | 5.20 |
The measurement of the FUJITSU MHT2060AT was carried out on Windows. Similar read and write speeds could certainly be achieved with the FUJITSU MHT2060AT under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the FUJITSU MHT2060AT should be used.
The Fujitsu MHT2060AT is a 2.5-inch hard disk drive (HDD) from Fujitsu's MHT series, produced in the early 2000s. Here are the most important technical details and features of this hard drive:
Technical details:
1. Capacity:
- 60 GB
2. Form factor:
- 2.5 inch (ideal for laptops and portable devices)
3. Speed:
- 4,200 rpm (RPM, which is rather slow compared to modern hard drives, but typical for that time)
4. Interface:
- ATA-100 (also known as IDE), which allows a maximum transfer rate of 100 MB/s.
5. Buffer size:
- 2 MB (cache memory that helps to temporarily store data and improve access times)
6. Average access time:
- Approximately 12 ms (milliseconds), which describes the time required to access a specific data location.
7. Power consumption:
- Typical: 1.2 watts in operation, 0.8 watts in idle mode (exact values ​​may vary).
8. Bug correction:
- Supports ECC (Error Correction Code) to detect and correct data errors.
Features:
1. Performance:
- The MHT2060AT offers decent performance for its time, with acceptable transfer rate and access times. The 4,200 RPM speed allows for quiet operation, but is slower than today's 5,400 RPM or 7,200 RPM hard drives.
2. Reliability:
- Fujitsu is known for producing reliable hard drives, and the MHT2060AT is no exception. The error correction technologies and robust construction contribute to its longevity.
3. Compatibility:
- The ATA-100 interface makes the hard drive compatible with many older systems. It fits in most laptops and devices that have a 2.5-inch hard drive bay.
Areas of application:
1. Laptops:
- The 2.5-inch size makes the MHT2060AT ideal for use in laptops where space and energy efficiency are important factors.
2. Portable devices:
- The MHT2060AT can also be used in portable devices such as external hard drive enclosures as long as the interface (ATA-100) is supported.
3. Extension of older systems:
- The hard drive can be used in older desktops or laptops that support ATA-100, as an upgrade or replacement for a defective hard drive.
4. Use in special applications:
- It could also be used in special applications where hard disk speed and capacity meet the requirements, such as some embedded systems or legacy point-of-sale systems.
Conclusion:
The Fujitsu MHT2060AT is a solid hard drive from the early 2000s with a capacity of 60 GB and a 2.5-inch design. It offers sufficient performance for the time, but falls short of modern hard drives in terms of speed and capacity. Nevertheless, it is a good choice for use in older systems or for special applications where a robust and reliable hard drive is required.
---
FUJITSU MHT2060AT and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of FUJITSU MHT2060AT.
The FUJITSU MHT2060AT is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the FUJITSU MHT2060AT regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.