HANCHU S SD SATA Disk Device
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| HANCHU S SD SATA Disk Device | 120 | 1070 | 430 | 367 | 96.74 | 207.26 | 0.12 | 0.05 |
| HANCHU S SD SATA Disk Device | 120 | 674 | 439 | 92 | 84.57 | 93.22 | 0.17 | 0.18 |
| HANCHU S SD SATA Disk Device | 120 | 674 | 439 | 92 | 84.57 | 93.22 | 0.17 | 0.18 |
| HANCHU S SD SATA Disk Device | 120 | 0 | 0 | 0 | 0.00 | 0.00 | ||
| HANCHU S SD SATA Disk Device | 120 | 0 | 0 | 0 | 0.00 | 0.00 | ||
| HANCHU S SD SATA Disk Device | 120 | 0 | 0 | 0 | 0.00 | 0.00 |
The measurement of the HANCHU S SD SATA Disk Device was carried out on Windows. Similar read and write speeds could certainly be achieved with the HANCHU S SD SATA Disk Device under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the HANCHU S SD SATA Disk Device should be used.
The HANCHU S SD SATA Disk Device is a poorly documented product and there are no specific technical data about such a model in the common databases. It may be a generic or lesser-known model manufactured in certain regions or for specific applications. Nevertheless, I can provide general information about similar devices and their typical features.
1. Technical details (general for similar devices)
- Model: HANCHU S SD SATA Disk Device (Hypothetical model based on general knowledge of SATA SSDs)
- Capacity: Varies by model, typically from 120 GB to 1 TB
- Form factor: 2.5 inch or M.2 (common for SATA SSDs)
- Interface: SATA III (6 Gb/s)
- Protocol: AHCI
- Storage technology: Mostly 3D NAND Flash (TLC - Triple-Level Cell or QLC - Quad-Level Cell)
- Sequential read/write speeds:
- Read: Typically up to 550 MB/s
- Write: Typically up to 500 MB/s
- 4K Random Read/Write Speeds:
- Read: Up to 90,000 IOPS
- Write: Up to 80,000 IOPS
- Cache: Varies; some models do not have a dedicated DRAM cache and use Host Memory Buffer (HMB)
- Power consumption:
- Operating mode: Approximately 2-3 W
- Idle mode: Approx. 0.5-1 W
- MTBF (Mean Time Between Failures): Typically up to 1 million hours
- Lifetime: Total Bytes Written (TBW) varies by model, typically 100-300 TBW
2. Functions
- SATA III interface: Provides a data transfer rate of up to 6 Gb/s, allowing backward compatibility with SATA II and SATA I.
- 3D NAND Flash: Increases storage density, improves performance and endurance compared to older NAND technologies.
- TRIM Support: Optimizes performance by helping the SSD clean up data blocks that are no longer needed and extend the lifespan of the SSD.
- Warranty: Many manufacturers offer 3-5 year warranties on their SATA SSDs, depending on the model and manufacturer.
3. Areas of application
- Desktop Computers: Ideal for upgrading memory capacity and speed in desktop systems. A good choice to improve system performance and reduce boot times.
- Laptops: Perfect for upgrading or replacing the standard hard drive with a faster and more reliable SSD. Provides better power efficiency and performance.
- External Storage Device: Can be used in external enclosures to provide portable storage for backups and data transfers.
- Gaming: Improved loading times and system responsiveness make them a great choice for gaming PCs.
- Professional applications: Suitable for applications such as video editing, graphic design and other data-intensive tasks.
4. Advantages
- Fast Performance: Fast read and write speeds compared to HDDs and improve overall system responsiveness.
- Energy Efficiency: Lower power consumption compared to HDDs, which extends battery life on laptops and reduces heat generation.
- Reliability: SSDs have no moving parts and are therefore more resistant to physical shocks and impacts.
- Silent: No noise as there are no moving parts.
5. Disadvantages
- Cost: Higher cost per GB compared to HDDs, especially at higher capacities.
- Lifespan: While modern SSDs have a long lifespan, the number of write cycles can be limited, especially on cheaper models without DRAM cache.
6. Installation and Compatibility
- Installation: A SATA SSD is installed in a free 2.5 inch bay of the computer or laptop and connected via a SATA data cable and a power cable.
- Compatibility: Compatible with most computers and laptops that support a SATA bay. Please check your system's specific requirements before installation.
Summary
The HANCHU S SD SATA Disk Device appears to be a generic model of SATA SSD suitable for a wide range of desktop and laptop applications. With typical features such as a SATA III interface, 3D NAND flash technology and a capacity that varies by model, it offers a good balance between performance and cost. The SSD improves system speed, power efficiency and reliability compared to traditional HDDs and is ideal for users looking for a cost-effective upgrade solution.
---
HANCHU S SD SATA Disk Device and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of HANCHU S SD SATA Disk Device.
The HANCHU S SD SATA Disk Device is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the HANCHU S SD SATA Disk Device regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.