INTEL SSDSCKGF256A5 SATA 256GB
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| INTEL SSDSCKGF256A5 SATA 256GB | 256 | 1007 | 397 | 280 | 275.38 | 219.61 | 0.18 | 0.25 |
| INTEL SSDSCKGF256A5 SATA 256GB | 256 | 931 | 402 | 263 | 179.16 | 97.46 | 0.17 | 0.10 |
The measurement of the INTEL SSDSCKGF256A5 SATA 256GB was carried out on Windows. Similar read and write speeds could certainly be achieved with the INTEL SSDSCKGF256A5 SATA 256GB under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the INTEL SSDSCKGF256A5 SATA 256GB should be used.
The Intel SSDSCKGF256A5 is an SSD (Solid-State Drive) from Intel that offers a storage capacity of 256 GB and uses the SATA interface. This SSD belongs to the Intel SSD 545s series and offers a combination of performance, reliability and energy efficiency. Here is a detailed description of the SSD, including technical details, features and application areas:
Technical details
1. Capacity:
- Storage capacity: 256 GB
- This capacity is suitable for users looking for a balance between storage capacity and performance. It works well as a main drive for the operating system and frequently used applications, as well as for additional data.
2. Interface:
- SATA III (6 Gb/s): The SSD uses the SATA III interface, which allows a maximum theoretical data transfer rate of up to 6 Gb/s (about 600 MB/s). This interface ensures high compatibility with modern computers and laptops.
3. Form factor:
- 2.5 inch: The 2.5 inch form factor is widely used for internal hard drives and SSDs. It fits into most desktop and laptop bays and is a standard size for internal storage solutions.
4. Controller:
- Intel Controller: The SSD uses Intel's proprietary controller, which ensures high performance and stability. The exact model name of the controller is not specified, but Intel controllers are known for their efficiency and performance optimization.
5. Memory chip type:
- Intel NAND Flash (TLC): The SSD uses Triple-Level Cell (TLC) NAND flash memory, which stores three bits per cell. TLC offers higher capacity at a lower price, but is less durable than MLC (Multi-Level Cell), but offers good performance for everyday applications.
6. Read and write speed:
- Maximum sequential read speed: Up to 545 MB/s
- Maximum sequential write speed: Up to 425 MB/s
- These speeds significantly improve system performance compared to traditional hard drives and are particularly useful for fast boot times and data access.
7. Access times:
- Random Read/Write: The SSD provides high IOPS (Input/Output Operations Per Second) for random read and write operations, improving system response time when processing applications and data.
8. TBW (Terabytes Written):
- Endurance: The TBW value indicates how many terabytes of data can be written to the SSD before the memory cells wear out. For the Intel SSDSCKGF256A5, this value is typically around 100-150 TBW, which is a good endurance for an SSD of this capacity.
9. Temperature range:
- Operating and storage temperature: The SSD can operate in an operating range of approximately 0°C to 70°C and has a storage temperature of -40°C to 85°C. These temperature ranges ensure reliability and stability under different operating conditions.
Features
1. Performance:
- High Speeds: With a maximum sequential read and write speed of up to 545 MB/s and 425 MB/s, the SSD offers excellent performance for everyday tasks. The high speed shortens boot times, improves application responsiveness, and increases overall system performance.
2. Energy efficiency:
- Low power consumption: The SSD is energy efficient and helps extend battery life on laptops. The low power consumption also reduces the energy requirements of desktop systems.
3. Reliability:
- Error Correction and Protection: The SSD uses advanced error correction mechanisms, including ECC (Error-Correcting Code), to ensure data integrity and prevent data loss. This increases the reliability and longevity of the SSD.
4. Thermal management:
- Thermal Protection Technologies: The SSD is equipped with technologies that prevent overheating and keep performance stable. These protection mechanisms help extend the lifespan of the SSD.
5. Intel SSD Toolbox:
- Management and Optimization: Intel offers SSD Toolbox, a software tool for monitoring SSD performance, performing firmware updates, and managing drive health. This tool helps keep the SSD running optimally and detect potential problems early.
6. TRIM support:
- Performance Optimization: The SSD supports the TRIM command, which maintains performance over time by allowing the operating system to delete unneeded data blocks on the SSD.
Scope
1. Desktop-Computer:
- Primary drive: The SSD can be used as the primary drive for the operating system and applications. It significantly improves system performance and reduces boot times and application loading times.
2. Laptops and notebooks:
- Upgrade Solution: The SSD is ideal for use in laptops to boost performance and extend battery life. The improved speed and power efficiency make it a valuable upgrade for older systems.
3. External storage enclosure:
- Portable storage solutions: By installing it in an external enclosure, the SSD can be used as a portable and powerful external drive that offers fast data transfers and reliability.
4. Backup solutions:
- Data backup: The SSD can be used to back up important data. Its high performance enables fast backups and restores of data.
5. Home office and office applications:
- General-purpose storage: Ideal for home office environments or small offices that require a reliable and fast storage solution. The SSD offers a good balance between capacity and performance for everyday office applications.
Conclusion
The Intel SSDSCKGF256A5 is a 256 GB SATA III SSD that offers high performance, energy efficiency and reliability. With its 2.5-inch form factor, maximum sequential read and write speeds of up to 545 MB/s and 425 MB/s, and the use of TLC NAND flash technology, it offers excellent performance for a wide range of applications. Support for TRIM, Intel SSD Toolbox and advanced error correction mechanisms make it a solid choice for improving system performance in desktop computers and laptops. Its energy efficiency and reliable performance are ideal for users looking for a high-performance and cost-effective storage solution.
---
INTEL SSDSCKGF256A5 SATA 256GB and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of INTEL SSDSCKGF256A5 SATA 256GB.
The INTEL SSDSCKGF256A5 SATA 256GB is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the INTEL SSDSCKGF256A5 SATA 256GB regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.