KINGSTON SUV500240G
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| KINGSTON SUV500240G | 240 | 1309 | 461 | 472 | 225.39 | 161.39 | 0.16 | 0.11 |
| KINGSTON SUV500240G | 240 | 1247 | 438 | 409 | 269.52 | 202.54 | 0.12 | 0.05 |
| KINGSTON SUV500240G | 240 | 948 | 358 | 316 | 230.07 | 48.54 | 0.13 | 0.07 |
The measurement of the KINGSTON SUV500240G was carried out on Windows. Similar read and write speeds could certainly be achieved with the KINGSTON SUV500240G under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the KINGSTON SUV500240G should be used.
The KINGSTON SUV500240G is a Solid State Drive (SSD) from Kingston, which belongs to the Kingston UV500 series. This series is known for its combination of high performance, reliability and energy efficiency. Here is a detailed description of the technical details, features and application areas of the KINGSTON SUV500240G:
Technical details
1. Capacity:
- 240 Gigabyte (GB)
2. Form factor:
- 2.5 inch: The standard form factor for many SSDs and HDDs that fits into most desktop PCs and laptops that support a 2.5 inch bay.
3. Interface:
- SATA III (6 Gbit/s): The SSD uses the SATA III interface, which enables a maximum data transfer rate of up to 6 Gbit/s. The SSD is backwards compatible with older SATA versions (SATA II and SATA I).
4. Memory chip technology:
- 3D TLC (Triple-Level Cell) NAND Flash Memory: The SSD uses 3D TLC NAND, which stores three bits per cell. This enables high storage density and good value for money.
5. Reading speed:
- Up to 520 MB/s: The maximum sequential read speed of the SSD, which ensures fast data access and system boots.
6. Write speed:
- Up to 500 MB/s: The maximum sequential write speed, enabling fast data transfer and storage.
7. Random read access:
- Up to 85,000 IOPS: The number of inputs/outputs per second (IOPS) that can be achieved during random read operations.
8. Random write access:
- Up to 65,000 IOPS: The number of random write IOPS.
9. Operating temperature:
- 0°C to 70°C: The temperature range in which the SSD can operate.
10. Storage temperature:
- -40°C to 85°C: The temperature range in which the SSD can be stored.
11. Power consumption:
- In operation: About 1.4 to 2.0 watts
- At idle: About 0.3 to 0.5 watts
12. MTBF (Mean Time Between Failures):
- Approximately 1,000,000 hours, depending on operating conditions and SSD quality.
13. TRIM support:
- Yes: Supports TRIM command to optimize performance by marking unused data blocks that can be deleted from the SSD.
14. Encryption:
- AES 256-bit hardware encryption: Provides hardware-based encryption to ensure data security.
Features
1. SATA III interface:
- High data transfer rates: Enables high data transfer rates of up to 6 Gbit/s and is backwards compatible with older SATA versions.
2. 3D TLC NAND:
- Good value for money: Offers a balance between cost, performance and storage density, ideal for everyday use and general applications.
3. High reading speed:
- Fast data access: With up to 520 MB/s read speed, the SSD improves system performance and shortens boot and loading times.
4. High writing speed:
- Fast data transfers: With write speeds of up to 500 MB/s, it enables fast data transfers and storage.
5. TRIM support:
- Performance Optimization: The TRIM command helps maintain SSD performance by removing data blocks that are no longer needed.
6. Hardware encryption:
- Data security: AES 256-bit encryption protects data from unauthorized access and secures sensitive information.
7. Energy efficiency:
- Low power consumption: Reduces power consumption compared to traditional hard drives and extends battery life in laptops.
8. Heat and shock resistance:
- Reliability: The SSD is resistant to heat and shock, which improves durability and reliability.
Areas of application
1. Desktop-PCs:
- Performance Enhancement: Ideal for upgrading desktop PCs to improve system performance and enable faster boot and load times.
2. Laptops:
- Enhanced Mobility: Provides a fast and reliable storage solution for laptops, with lower power consumption and improved battery life.
3. System drives:
- Primary Storage: Can be used as the primary drive for the operating system to increase overall system performance.
4. Multimedia applications:
- Fast data processing: Ideal for storing and editing media files such as photos, videos and music.
5. Gaming:
- Improved loading times: Reduces loading times and improves game responsiveness.
6. Backup and storage solutions:
- Expansion: Can be used as additional storage for backups and large amounts of data.
Conclusion
The KINGSTON SUV500240G is a powerful and reliable 2.5-inch SSD with a capacity of 240 GB that uses the SATA III interface. With high read and write speeds, support for TRIM and AES 256-bit encryption, it offers excellent performance and security for various applications. The combination of 3D TLC NAND, energy efficiency and robustness makes it an ideal choice for desktop PCs, laptops and other systems where performance and reliability are required.
---
KINGSTON SUV500240G and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of KINGSTON SUV500240G.
The KINGSTON SUV500240G is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the KINGSTON SUV500240G regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.