SAMSUNG MZNLN256HAJQ-000L2
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| SAMSUNG MZNLN256HAJQ-000L2 | 256 | 1117 | 426 | 384 | 91.69 | 68.47 | 0.18 | 0.11 |
| SAMSUNG MZNLN256HAJQ-000L2 | 256 | 1117 | 426 | 384 | 91.69 | 68.47 | 0.18 | 0.11 |
The measurement of the SAMSUNG MZNLN256HAJQ-000L2 was carried out on Windows. Similar read and write speeds could certainly be achieved with the SAMSUNG MZNLN256HAJQ-000L2 under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the SAMSUNG MZNLN256HAJQ-000L2 should be used.
SAMSUNG MZNLN256HAJQ-000L2
The Samsung MZNLN256HAJQ-000L2 is a 256GB NVMe SSD designed for use in modern computers. This SSD belongs to the Samsung 980 Pro series and offers advanced performance features suitable for a wide range of applications. Here is a detailed description of the Samsung MZNLN256HAJQ-000L2, including technical details, features and application areas:
Technical details
1. Capacity:
- Storage capacity: 256 GB
- The 256 GB capacity is suitable for installing the operating system, important applications and moderate amounts of data. This size is particularly useful for users who are looking for high performance with a relatively small storage requirement.
2. Interface:
- NVMe PCIe 3.0 x4: The SSD uses the NVMe protocol via a PCIe 3.0 x4 interface. This connection enables very high data transfer rates and low latency compared to older interfaces such as SATA. NVMe is specifically optimized for the use of flash memory and offers improved bandwidth and efficiency.
3. Form factor:
- M.2 2280: The M.2 2280 form factor measures 22 x 80 mm and is the standard form factor for modern NVMe SSDs. It fits into most desktop and laptop motherboards that support an M.2 slot.
4. Controller:
- Samsung Controller: The SSD uses an advanced Samsung controller known for its high performance and reliability. The exact model name of the controller is not specified, but Samsung controllers are known for their efficient data processing and performance optimization.
5. Memory chip type:
- Samsung V-NAND Flash (TLC): The SSD uses Samsung V-NAND (Triple-Level Cell) flash memory, which stores three bits per cell. V-NAND is a 3D NAND technology that stacks the memory cells vertically to improve performance and capacity. TLC offers a good balance between cost, performance and storage capacity.
6. Read and write speed:
- Maximum sequential read speed: Up to 3,500 MB/s
- Maximum sequential write speed: Up to 2,500 MB/s
- These speeds enable very fast data transfers and contribute to excellent overall system performance. They reduce system boot times and improve application and data loading times.
7. Access times:
- Random Read/Write: The SSD provides very high IOPS (Input/Output Operations Per Second) for random read and write operations. This improves system responsiveness when processing data and applications, especially for workloads with many small files.
8. TBW (Terabytes Written):
- Lifespan: The TBW value indicates how many terabytes of data can be written to the SSD before the memory cells wear out significantly. For the Samsung MZNLN256HAJQ-000L2, this value is typically around 150 TBW, which represents a high level of durability for an SSD of this capacity.
9. Temperature range:
- Operating and storage temperature: The SSD can operate in an operating range of approximately 0°C to 70°C and has a storage temperature of -40°C to 85°C. These temperatures ensure reliability and stability under various operating conditions.
Features
1. Performance:
- High Speeds: The SSD offers a maximum sequential read and write speed of up to 3,500 MB/s and 2,500 MB/s. This high speed significantly improves the overall performance of the system, reduces boot times and speeds up the execution of applications.
2. Energy efficiency:
- Low Power Consumption: The SSD is energy efficient, which helps extend battery life in laptops. The low power consumption also reduces power requirements in desktop systems and contributes to lower heat generation.
3. Reliability:
- Error Correction and Protection: The SSD uses advanced error correction technologies, including ECC (Error-Correcting Code), to ensure data integrity and prevent data loss. The SSD also provides features to monitor drive health and detect potential problems early.
4. Thermal management:
- Thermal protection technologies: The SSD is equipped with technologies that prevent overheating and keep performance stable under load. These protection mechanisms prevent performance degradation due to overheating and contribute to the longevity of the SSD.
5. Samsung Magician Software:
- Management and Optimization: Samsung Magician software allows users to monitor the SSD, perform firmware updates, and optimize performance. The software also provides features for data migration and ensuring the SSD's optimal operating conditions.
6. TRIM support:
- Performance optimization: The SSD supports the TRIM command, which allows the operating system to delete unused data blocks on the SSD to maintain performance over time.
Scope
1. Desktop-Computer:
- Primary drive: The SSD can be used as the primary drive for the operating system and applications. Its high performance improves system speed, shortens boot times and accelerates application execution.
2. Laptops and notebooks:
- Upgrade Solution: Ideal for laptops that require a performance boost and improved battery life, the SSD offers fast data transfers and contributes to the overall performance of the system.
3. Gaming-PCs:
- High-performance applications: Due to its high speeds, the SSD is ideal for gaming PCs as it reduces game loading times and improves overall performance when processing large amounts of data.
4. Professional applications:
- Data storage for creative professionals: The SSD is also suitable for professional applications such as video editing, 3D modeling and big data analysis. Its high performance supports fast data processing and transfer.
5. External storage solutions:
- Portable storage solutions: By installing it in an external enclosure, the SSD can be used as a powerful external drive that offers fast data transfers.
Conclusion
The Samsung MZNLN256HAJQ-000L2 is a 256 GB NVMe PCIe 3.0 x4 SSD that offers excellent performance, energy efficiency and reliability. With its M.2 2280 form factor, maximum sequential read and write speeds of up to 3,500 MB/s and 2,500 MB/s, respectively, and the use of Samsung V-NAND TLC flash technology, it offers top-notch performance for modern applications. TRIM support, Samsung Magician software and advanced error correction mechanisms make it an excellent choice for improving system performance in desktop computers, laptops and professional work environments. The SSD is ideal for users who need high speed and reliability, whether for everyday applications, gaming or professional tasks.
---
SAMSUNG MZNLN256HAJQ-000L2 and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of SAMSUNG MZNLN256HAJQ-000L2.
The SAMSUNG MZNLN256HAJQ-000L2 is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the SAMSUNG MZNLN256HAJQ-000L2 regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.