SAMSUNG SP0842N ATA Device
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| SAMSUNG SP0842N ATA Device | 80 | 81 | 46 | 20 | 0.68 | 1.00 | 9.68 | 4.13 |
The measurement of the SAMSUNG SP0842N ATA Device was carried out on Windows. Similar read and write speeds could certainly be achieved with the SAMSUNG SP0842N ATA Device under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the SAMSUNG SP0842N ATA Device should be used.
The SAMSUNG SP0842N is a hard drive from Samsung that belongs to the SpinPoint P80 series. It is a 3.5-inch SATA hard drive designed for desktop computers and other applications. This hard drive offers a combination of capacity, performance and reliability and is suitable for a variety of usage scenarios.
Here is a detailed description of the technical details, features and application areas of the Samsung SP0842N ATA Device:
Technical Details
1. Capacity:
- 80 GB: The SP0842N offers a storage capacity of 80 gigabytes. This was a typical capacity for desktop hard drives at the time, although now considered relatively small, especially compared to today's standards.
2. Form Factor:
- 3.5 inch: The hard drive uses the standard 3.5 inch form factor common for desktop PCs and some external enclosures. This form factor allows for wide compatibility and easy integration into existing systems.
3. Interface:
- ATA/133 (Parallel ATA): The SP0842N uses the Parallel ATA (PATA) interface, also known as IDE, with a maximum data transfer rate of 133 MB/s. This was the common interface before the introduction of SATA (Serial ATA).
4. Rotational Speed:
- 7200 RPM: The hard drive rotates at a speed of 7200 revolutions per minute. This speed offers a good balance between performance and noise, allowing for decent read and write speeds with relatively low power consumption.
5. Cache:
- 2 MB Cache: The hard drive is equipped with a 2 megabyte cache that acts as a fast temporary storage area to improve access times to frequently used data and increase overall performance.
6. Throughput Rate:
- Maximum Data Transfer Rate: When using the ATA/133 interface, the hard drive can theoretically achieve data transfer rates of up to 133 MB/s. Actual performance may vary depending on usage and system configuration.
7. Error Correction:
- ECC (Error Correction Code): The hard drive uses error correction mechanisms to ensure data integrity and minimize errors during data transfer.
8. MTBF (Mean Time Between Failures):
- Reliability: The MTBF of the SP0842N is typically in the range of over 500,000 hours, indicating high reliability.
9. Power Consumption:
- Typical Power Consumption: The hard drive typically consumes about 6 to 8 watts during operation, with consumption dropping to about 0.8 to 1.5 watts in standby mode.
Features
1. High Performance:
- Good balance between performance and energy efficiency: With a rotation speed of 7200 RPM, the SP0842N offers solid performance for desktop applications and general computing tasks.
2. Error Correction:
- Improved Data Integrity: The use of ECC protects data integrity by correcting errors during data storage and transfer.
3. Energy Efficiency:
- Efficient Operation: The hard drive offers reasonable energy efficiency that optimizes power consumption during operation and in standby mode.
4. Compact Design:
- Standard Form Factor: The 3.5-inch form factor enables broad compatibility with desktop computers and other devices that support this standard.
Application Area
1. Desktop Computers:
- Primary Hard Drive: The SP0842N is suitable as a primary hard drive for desktop computers, especially for systems that do not require particularly large storage capacities or extremely fast access.
2. Spare Hard Drive:
- Upgrade or Replacement: It can be used as a replacement for older hard drives or to upgrade systems that support the PATA standard.
3. Storage for smaller projects:
- Archiving small amounts of data: Due to its capacity, it can be used for smaller projects, archives or as an additional hard drive for special applications.
4. External enclosure:
- External storage: The SP0842N can also be used in an external enclosure to provide additional storage options for laptops or as a portable storage medium.
5. Legacy systems:
- Use in older systems: Because it uses an ATA/133 interface, it is especially useful for older systems that require this standard.
Conclusion
The Samsung SP0842N is an 80 GB 3.5-inch hard drive based on the Parallel ATA (PATA) interface. With a rotation speed of 7200 RPM, a 2 MB cache and a maximum data transfer rate of 133 MB/s, it offers solid performance for desktop computers and other applications. It is ideal for general computing tasks, smaller storage projects, and as a replacement or expansion hard drive in systems that support PATA. Despite its older technology, it offers a reliable and energy-efficient solution to storage needs and is particularly suitable for legacy systems and applications that do not require the latest interfaces.
---
SAMSUNG SP0842N ATA Device and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of SAMSUNG SP0842N ATA Device.
The SAMSUNG SP0842N ATA Device is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the SAMSUNG SP0842N ATA Device regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.