ST3160827AS ATA Device
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| ST3160827AS ATA Device | 160 | 0 | 0 | 0 | 0.00 | 0.00 | 6.42 | 3.19 |
The measurement of the ST3160827AS ATA Device was carried out on Windows. Similar read and write speeds could certainly be achieved with the ST3160827AS ATA Device under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the ST3160827AS ATA Device should be used.
ST3160827AS ATA Device
The ST3160827AS ATA Device is a specific model of hard disk drive (HDD) from Seagate. Here’s a detailed breakdown:
Breakdown:
- Brand: Seagate
- Model: ST3160827AS
- Type: Hard Disk Drive (HDD)
- Capacity: 160 GB
- Interface: SATA (Serial ATA)
- Form Factor: 3.5-inch
- RPM: 7200 RPM
Key Details:
- ST3160827AS: This model number indicates a 160 GB hard drive from Seagate’s Barracuda series.
- Capacity:
- 160 GB: Provides a modest amount of storage. Suitable for basic applications, operating systems, and limited data storage needs.
- Form Factor:
- 3.5-inch: The standard size for desktop hard drives, designed to fit into typical drive bays in desktop computers and external enclosures.
- Interface:
- SATA I (1.5 Gb/s): Uses the SATA I interface, which supports a maximum theoretical bandwidth of 1.5 Gb/s (150 MB/s). This is slower compared to SATA II and SATA III but still provides adequate performance for basic tasks.
- RPM (Revolutions Per Minute):
- 7200 RPM: Offers good performance for data access and transfer speeds compared to 5400 RPM drives. This speed is suitable for general desktop computing tasks.
Performance:
- Read/Write Speeds:
- Sequential Read/Write: Typically, 7200 RPM drives like the ST3160827AS offer sequential read/write speeds of up to approximately 80-100 MB/s. These speeds are suitable for basic computing tasks but are slower compared to modern SSDs.
Features:
- Reliability:
- Seagate Barracuda Series: Known for its reliability and performance, the Barracuda series is designed to offer consistent and dependable performance for everyday computing needs.
- Software:
- SeaTools: Seagate provides diagnostic and monitoring software called SeaTools. This tool helps users check the health of the drive and perform maintenance tasks.
- Applications:
- System Storage: Suitable for use as a primary drive in desktops, providing storage for the operating system and essential applications.
- Basic Data Storage: Can be used for storing a limited amount of files, media, and other data.
- Backup Solutions: Can also be used as a backup drive, though its capacity is relatively small by modern standards.
Historical Context:
- Seagate Barracuda Series: The Barracuda series represents Seagate’s line of high-performance and reliable HDDs. The ST3160827AS is a mid-range model within this series, offering a balance of performance and capacity suitable for older systems or those with moderate storage needs.
Summary:
The Seagate ST3160827AS is a 160 GB 3.5-inch SATA HDD operating at 7200 RPM. It is part of Seagate’s Barracuda series, designed for general desktop use. The SATA I interface offers compatibility with older systems, and the 7200 RPM speed provides decent performance for basic computing tasks. With its 160 GB capacity, this drive is best suited for older systems or users with modest storage requirements.
ST3160827AS ATA Device and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of ST3160827AS ATA Device.
The ST3160827AS ATA Device is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the ST3160827AS ATA Device regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.