SanDisk SD6SB1M256G1022I
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| SanDisk SD6SB1M256G1022I | 256 | 1227 | 396 | 419 | 320.59 | 210.89 | 0.13 | 0.04 |
The measurement of the SanDisk SD6SB1M256G1022I was carried out on Windows. Similar read and write speeds could certainly be achieved with the SanDisk SD6SB1M256G1022I under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the SanDisk SD6SB1M256G1022I should be used.
SanDisk SD6SB1M256G1022I
The SanDisk SD6SB1M256G1022I is a solid-state drive (SSD) from SanDisk that belongs to the SanDisk X400 series. These SSDs are known for their performance, reliability and compatibility and are particularly suitable for use in desktop PCs, laptops and other computers. The model name indicates a specific configuration and capacity.
General description
The SanDisk SD6SB1M256G1022I is a 2.5-inch SSD with a capacity of 256 GB. It uses the SATA III (6 Gb/s) interface, which enables a high transfer rate for fast access to data. This SSD uses TLC NAND flash memory and a powerful controller to provide a balance between performance and energy efficiency.
Technical Details
Basic Features
- Model Name: SanDisk SD6SB1M256G1022I
- Capacity: 256 GB
- Form Factor: 2.5 inch
- Interface: SATA III (6 Gb/s)
- NAND Type: TLC (Triple-Level Cell) NAND Flash
- Controller: SanDisk Controller (model may vary)
Performance
- Maximum Sequential Read Speed: Up to 545 MB/s
- Maximum Sequential Write Speed: Up to 425 MB/s
- Maximum Random Read Performance (4K IOPS): Up to 78,000 IOPS
- Maximum Random Write Performance (4K IOPS): Up to 75,000 IOPS
Protection and Management Features
- Error Correction:
- ECC (Error Correction Code): Uses advanced error correction techniques to ensure the integrity of stored data and extend the lifespan of the SSD.
- Power Management:
- Idle Mode: Reduces power consumption during idle mode, which extends laptop battery life and lowers overall power consumption.
- Wear Leveling:
- Data Distribution: Distributes writes evenly across memory cells to maximize SSD lifespan.
- TRIM Support:
- Performance Optimization: Optimizes SSD performance by erasing unused data blocks, improving speed during repeated writes.
- SMART Support:
- Monitoring and Diagnostics: Monitors SSD health and performance, providing early warnings of potential errors or wear.
Features
- High Performance: The SSD offers fast sequential read and write speeds, enabling improved system performance and faster access times for the operating system and applications.
- Energy Efficiency: The SSD is energy efficient and helps reduce power consumption in laptops, which extends battery life.
- Reliability: The use of TLC NAND flash and advanced error correction and management techniques ensures reliable storage and long life.
- Easy Installation: The 2.5-inch form factor and SATA III interface allow for easy retrofitting or upgrade in most computers.
Application Range
- Desktop PCs: Ideal for desktop computers to improve system performance, including faster boot times and reduced application loading times.
- Laptops: Perfect for laptops as the SSD reduces energy consumption and increases performance, resulting in longer battery life and faster access to data.
- Gaming: The SSD can improve game loading times and overall system responsiveness, resulting in a better gaming experience.
- Data Storage and Backup: Suitable for storing important data and backups as it offers reliable protection and fast access times.
Benefits and Challenges
Benefits
- Fast Performance: With high sequential read and write speeds, the SSD offers excellent performance for everyday applications and operating systems.
- Energy Efficiency: The SSD helps reduce power consumption, which is especially important for laptops to extend battery life.
- Reliability: Thanks to the advanced error correction and management techniques, the SSD offers high reliability and long lifespan.
- Ease of Upgrade: The 2.5-inch form factor and SATA III interface allow for easy installation or upgrade in many computers.
Challenges
- Capacity: At 256GB, the SSD may not provide enough storage for users with large amounts of data or extensive media libraries.
- Cost: Although SSDs have been reduced in price, they are still more expensive compared to traditional hard disk drives (HDDs), especially when larger capacities are needed.
- Speed ​​Compared to NVMe: While the SSD offers high speeds, NVMe SSDs that connect via PCIe are superior in terms of performance and speed.
Conclusion
The SanDisk SD6SB1M256G1022I is a powerful and reliable SSD that offers an excellent solution for improving system performance in desktop PCs and laptops. With fast read and write speeds, energy-efficient operation, and advanced error correction and management features, it is well suited for a variety of applications, including operating system installations, gaming, and data management. While capacity is limited compared to newer and larger SSD models, the SSD offers a good balance between performance, reliability, and price, making it an excellent choice for many users.
---
SanDisk SD6SB1M256G1022I and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of SanDisk SD6SB1M256G1022I.
The SanDisk SD6SB1M256G1022I is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the SanDisk SD6SB1M256G1022I regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.