SanDisk SD8SN8U128G1002
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| SanDisk SD8SN8U128G1002 | 128 | 1033 | 446 | 307 | 284.24 | 129.05 | 0.16 | 0.10 |
The measurement of the SanDisk SD8SN8U128G1002 was carried out on Windows. Similar read and write speeds could certainly be achieved with the SanDisk SD8SN8U128G1002 under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the SanDisk SD8SN8U128G1002 should be used.
SanDisk SD8SN8U128G1002
The SanDisk SD8SN8U128G1002 is an SSD (Solid State Drive) from SanDisk that is in the NVMe SSD range. This SSD was developed for use in various computers and laptops to ensure high performance and reliability in data processing. Here you will find a detailed description, technical details, features and application areas of this SSD.
General Description
The SanDisk SD8SN8U128G1002 is a 128GB NVMe SSD designed for high speed and reliability. It uses the NVMe (Non-Volatile Memory Express) interface over the PCIe protocol to enable faster data transfer compared to older SATA SSDs. This SSD is designed for users who need a fast and reliable storage solution for their computers.
Technical Details
1. Model Name:
- SanDisk SD8SN8U128G1002
2. Capacity:
- 128GB: Suitable for storing the operating system, important applications, and a limited amount of data. This is a good choice for users who want to use an additional drive for special tasks or as a system drive.
3. Form Factor:
- M.2 2280: This is the common form factor for NVMe SSDs. It is compact and fits in most modern laptops and desktop motherboards.
4. Interface:
- NVMe 1.2: An interface that communicates using the PCIe protocol. NVMe offers lower latency and higher data transfer rates compared to SATA.
5. Memory Chip Technology:
- 3D NAND Flash: This technology enables higher density and performance of the memory cells by arranging the memory chips vertically.
6. Controller:
- SanDisk Controller: Specially designed to optimize the performance and efficiency of the SSD.
7. Performance:
- Read speed: Up to 550 MB/s
- Write speed: Up to 380 MB/s
- These speeds enable fast data processing and a responsive system.
8. Reliability:
- MTBF (Mean Time Between Failures): Up to 1.5 million hours
- TBW (Total Bytes Written): Around 100 TBW for the 128 GB variant
- These values ​​show the reliability and lifespan of the SSD, even with intensive use.
9. Power consumption:
- Typical operating consumption: Around 2.5 W
- Typical idle consumption: Around 0.3 W
- Low power consumption contributes to efficiency and extends battery life in laptops.
10. Temperature Range:
- Operating Temperature: 0°C to 70°C
- Storage Temperature: -40°C to 85°C
- These temperature ranges ensure reliable performance in different operating conditions.
11. Encryption:
- AES 256-bit Encryption: Supports hardware-based encryption to protect data and prevent unauthorized access.
12. Form Factor Dimensions:
- Dimensions: 22 mm x 80 mm x 3.5 mm (W x L x H)
- Standard size for M.2 2280 SSDs.
13. Weight:
- Typical: Approximately 8 g
- Lightweight design for easy integration into various systems.
14. Interface Type:
- PCIe Gen 3 x2: Uses two PCIe lanes for high bandwidth.
Features
1. High Speed:
- The SSD offers good read and write speeds of up to 550 MB/s and 380 MB/s, resulting in fast boot times and fast file transfers.
2. NVMe technology:
- The NVMe interface ensures lower latency and higher data rates compared to SATA SSDs.
3. 3D NAND technology:
- 3D NAND increases storage density and improves the performance and durability of the SSD.
4. Energy efficiency:
- Low power consumption during operation and idle, which can extend the battery life of laptops.
5. Hardware-based encryption:
- AES 256-bit encryption protects the data on the SSD from unauthorized access.
6. High reliability:
- High MTBF and TBW values ​​ensure a long service life of the SSD.
Areas of application
1. Desktop PCs:
- Ideal for use in desktop PCs to speed up the operating system and important applications.
2. Laptops and Ultrabooks:
- The M.2 2280 form factor makes this SSD suitable for modern laptops and Ultrabooks, where it offers a fast and compact storage solution.
3. System upgrades:
- An excellent choice for upgrading older systems to improve performance and responsiveness.
4. Fast boot drives:
- Perfect as a boot drive for operating systems to enable fast boot times and an improved user experience.
5. Compact storage solutions:
- Due to its size and shape, the SSD is also suitable for compact devices that need to save space.
Summary
The SanDisk SD8SN8U128G1002 is a 128 GB NVMe SSD designed for users who need a reliable and fast storage solution. With an M.2 2280 form factor, NVMe 1.2 interface and 3D NAND technology, it offers high performance and efficiency. The SSD is ideal for use in desktops, laptops and as a system drive for fast boot times and fast file transfers. It also offers high reliability and protection through hardware-based encryption.
---
SanDisk SD8SN8U128G1002 and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of SanDisk SD8SN8U128G1002.
The SanDisk SD8SN8U128G1002 is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the SanDisk SD8SN8U128G1002 regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.