Teclast 120GB S500
User Benchmarks
| Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
| Teclast 120GB S500 | 120 | 0 | 0 | 0 | 0.00 | 0.00 |
The measurement of the Teclast 120GB S500 was carried out on Windows. Similar read and write speeds could certainly be achieved with the Teclast 120GB S500 under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the Teclast 120GB S500 should be used.
The Teclast 120GB S500 is a Solid State Drive (SSD) specially designed for users looking for a cost-effective but powerful storage solution. It offers a combination of good performance, energy efficiency and reliability. Here is a detailed description, including technical details, features and application areas of the Teclast 120GB S500.
General Description
The Teclast 120GB S500 is a 120GB SSD designed for use in desktops, laptops, and other devices that can benefit from the fast data processing and advantages of SSD technology. With SSD technology, you get significant performance improvements over traditional hard disk drives (HDDs), including faster boot and load times, and improved system response times.
Technical Details
1. Storage Capacity:
- 120GB: The drive offers 120GB of storage capacity, which is sufficient for a system drive or as a secondary drive to store applications and files.
2. Form Factor:
- 2.5 inch: The form factor is 2.5 inch, the standard for many modern SSDs and hard disk drives. This allows for easy integration into most laptops and desktop PCs.
3. Interface:
- SATA III (SATA 6 Gb/s): The SSD uses the SATA III interface, which supports data transfer rates of up to 6 Gb/s. This ensures fast communication between the SSD and the rest of the system.
4. Read/Write Speed:
- Read Speed: Up to 500 MB/s. The high read speed ensures quick system boots and fast application loading.
- Write Speed: Up to 450 MB/s. The high write speed enables fast data transfer and storage.
5. NAND Type:
- TLC (Triple-Level Cell): The SSD uses TLC NAND flash memory, which stores three bits per memory cell. TLC offers a good balance between performance and cost and is often found in consumer models.
6. Cache:
- DRAM Cache: It is unspecified if a DRAM cache is present, but many SSDs in this price range use DRAM-less designs that optimize performance via the SLC (Single-Level Cell) cache or through the controller software.
7. Endurance:
- TBW (Total Bytes Written): The exact TBW number is unspecified, but typically 120GB SSDs have a TBW of around 50-100TB. This gives an idea of ​​the durability of the drive.
8. MTBF (Mean Time Between Failures):
- MTBF: The MTBF for this type of SSD is typically around 1-2 million hours, which represents high reliability.
9. Power Consumption:
- Power Consumption: The SSD has low power consumption during operation and when idle, which contributes to energy efficiency. Typical values ​​are around 2-3 W in operation and 0.5 W in idle.
10. Operating temperature:
- Temperature Range: The SSD can operate in an operating temperature range of 0°C to 70°C, making it suitable for various environments.
Features
1. High Performance:
- Fast Read and Write Speeds: The SSD offers high data transfer rates, ensuring fast boot times, application load times, and system response times.
2. Energy Efficiency:
- Low Energy Consumption: The SSD has low power consumption, which contributes to better energy efficiency and longer battery life in laptops.
3. Reliability:
- High MTBF: The high MTBF and TBW ensure a reliable and long-lasting storage solution.
4. Advanced Features:
- SMART Support: The drive supports SMART (Self-Monitoring, Analysis, and Reporting Technology) to monitor the health of the drive and detect potential problems early.
5. Compact Design:
- 2.5-inch form factor: The form factor allows for easy installation in most devices, including older laptops and desktop PCs.
6. Fast Data Processing:
- Low Latency: SSD technology reduces latency in data access compared to traditional hard disk drives.
Application Areas
1. System Upgrade:
- Improve System Performance: The Teclast 120GB S500 can be used to replace existing HDDs in desktops and laptops, resulting in significant performance improvements in system boot and load times.
2. Operating System Drive:
- Install Operating Systems: The SSD is ideal for installing operating systems to ensure fast boot times and responsive system behavior.
3. Secondary Storage:
- Additional Storage: It can be used as a secondary drive in systems to store applications, games and data.
4. Gaming:
- Game Storage: The high performance of the SSD is useful for saving and loading games, resulting in faster loading times and better gaming experience.
5. Multimedia and Data Management:
- Media File Storage: The drive can be used for storing and managing large media files such as videos, photos and music.
6. Portability:
- External Enclosure: When housed in an external enclosure, the drive can be used as a portable storage device, ideal for data transfer and backup.
Summary
The Teclast 120GB S500 is a 120GB SSD with SATA III interface that offers high read and write speeds. With a 2.5-inch form factor, TLC NAND memory, and a typical lifespan, the SSD is a cost-effective yet capable solution for system upgrades and additional storage needs. It offers a good balance between performance, power efficiency, and reliability, and is ideal for most desktop and laptop applications.
---
Teclast 120GB S500 and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of Teclast 120GB S500.
The Teclast 120GB S500 is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the Teclast 120GB S500 regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.