ST380815AS ATA Device
User Benchmarks
Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
ST380815AS ATA Device | 80 | 132 | 60 | 56 | 0.74 | 0.74 | 12.16 | 5.52 |
ST380815AS ATA Device | 80 | 107 | 49 | 44 | 0.63 | 0.91 | 13.38 | 5.46 |
The measurement of the ST380815AS ATA Device was carried out on Windows. Similar read and write speeds could certainly be achieved with the ST380815AS ATA Device under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the ST380815AS ATA Device should be used.
The ST380815AS ATA Device is a model of hard disk drive (HDD) from Seagate. Here’s a detailed breakdown:
Breakdown:
- Brand: Seagate
- Model: ST380815AS
- Type: Hard Disk Drive (HDD)
- Capacity: 80 GB
- Interface: SATA (Serial ATA)
- Form Factor: 3.5-inch
- RPM: 7200 RPM
Key Details:
- ST380815AS: This model number indicates an 80 GB hard drive from Seagate’s Barracuda series, designed for general-purpose use.
- Capacity:
- 80 GB: Provides relatively modest storage capacity compared to modern standards. Suitable for basic computing needs, including operating systems and essential applications.
- Form Factor:
- 3.5-inch: This is the standard size for desktop HDDs, designed to fit into typical drive bays in desktop computers and external enclosures.
- Interface:
- SATA I (1.5 Gb/s): The drive uses the SATA I interface, which supports a maximum theoretical bandwidth of 1.5 Gb/s (150 MB/s). While slower than SATA II and SATA III, it still provides adequate performance for basic tasks.
- RPM (Revolutions Per Minute):
- 7200 RPM: Offers good performance for data access and transfer speeds compared to 5400 RPM drives. This speed is suitable for general desktop computing tasks.
Performance:
- Read/Write Speeds:
- Sequential Read/Write: Typically, 7200 RPM drives like the ST380815AS offer sequential read/write speeds up to approximately 80-100 MB/s. These speeds are adequate for basic computing tasks but are slower compared to modern SSDs.
Features:
- Reliability:
- Seagate Barracuda Series: The Barracuda series is known for its reliability and performance. This drive is built to be a dependable solution for everyday computing and storage needs.
- Software:
- SeaTools: Seagate provides diagnostic and monitoring software called SeaTools, which helps users check the health of the drive and perform maintenance tasks.
- Applications:
- System Storage: Suitable for use as a primary drive in desktops, providing storage for the operating system and essential applications.
- Basic Data Storage: Can be used for storing a limited amount of files, media, and other data.
- Backup Solutions: Can serve as a backup drive for additional storage needs, though its capacity is relatively small by current standards.
Historical Context:
- Seagate Barracuda Series: The Barracuda series represents Seagate’s line of high-performance and reliable HDDs. The ST380815AS is an entry-level model within this series, aimed at providing a balance of performance and capacity for users with moderate storage needs.
Summary:
The Seagate ST380815AS is an 80 GB 3.5-inch SATA HDD operating at 7200 RPM. It is part of Seagate’s Barracuda series, designed for general desktop use. The SATA I interface offers compatibility with older systems, and the 7200 RPM speed provides decent performance for basic computing tasks. With its modest capacity, this drive is best suited for older systems or applications where high storage capacity is not critical.
ST380815AS ATA Device and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of ST380815AS ATA Device.
The ST380815AS ATA Device is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the ST380815AS ATA Device regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.