TOSHIBA THNSNJ128GDNU
User Benchmarks
Model | Type | Score | Seq. Read MB | Seq. Write MB | Read 4k64QD | Write 4k64QD | Read Access msek. | Write Access msek. |
TOSHIBA THNSNJ128GDNU | 128 | 1413 | 502 | 451 | 242.34 | 193.27 | 0.17 | 0.06 |
TOSHIBA THNSNJ128GDNU | 128 | 1101 | 511 | 256 | 223.84 | 82.09 | 0.18 | 0.07 |
The measurement of the TOSHIBA THNSNJ128GDNU was carried out on Windows. Similar read and write speeds could certainly be achieved with the TOSHIBA THNSNJ128GDNU under Linux and MacOS. Of course, the correct hard drive driver should be installed and the correct interface for the TOSHIBA THNSNJ128GDNU should be used.
The Toshiba THNSNJ128GDNU is an internal SSD (solid-state drive) with a capacity of 128 GB. It uses the SATA interface and belongs to the early generations of SATA SSDs, which are characterized by solid performance and reliability. Here is a detailed description of the SSD, including technical details, features and application areas:
Technical details
1. Capacity:
- Storage capacity: 128 GB
- This capacity is sufficient for basic storage needs, ideal for use as a system drive or as additional storage for smaller amounts of data.
2. Interface:
- SATA III (6 Gb/s): The SSD uses the SATA III interface, which offers a maximum theoretical data transfer rate of 6 Gb/s (about 600 MB/s). This interface is widely used and enables high compatibility with various systems.
3. Form factor:
- 2.5-inch: The 2.5-inch form factor is standard for many internal hard drives and SSDs, especially in laptops and desktop computers. It allows easy integration into most devices that support this form factor.
4. Controller:
- Toshiba Controller: The SSD uses a Toshiba proprietary controller that is responsible for managing storage operations and ensuring stable performance. The exact model name of the controller may vary, but it is designed to optimize the performance and reliability of the SSD.
5. Memory chip type:
- Toshiba NAND Flash: The SSD uses Toshiba's NAND flash memory, presumably TLC (Triple-Level Cell) or MLC (Multi-Level Cell). TLC stores three bits per cell, allowing for higher capacity at a lower price, while MLC stores two bits per cell, offering better performance and durability.
6. Read and write speed:
- Maximum sequential read speed: Up to 550 MB/s
- Maximum sequential write speed: Up to 450 MB/s
- These speeds are typical for SATA SSDs and offer a significant improvement over traditional hard drives in terms of data transfer rates.
7. Access times:
- Random Read/Write: The SSD offers good random read and write speeds, enabling fast response time in everyday tasks and applications.
8. TBW (Terabytes Written):
- Endurance: The TBW value indicates how many terabytes of data can be written to the SSD before the cells wear out significantly. For the THNSNJ128GDNU, this value is typically around 50-100 TBW, which is a reasonable endurance for an SSD of this capacity.
9. Temperature range:
- Operating and storage temperature: The SSD can operate in an operating range of approximately 0°C to 70°C and has a storage temperature of -40°C to 85°C. These temperatures ensure reliability and stability under various operating conditions.
Features
1. Performance:
- Good performance for daily tasks: The SSD offers solid performance for everyday tasks such as system boot, application launch, and data access. With maximum sequential read and write speeds of up to 550 MB/s and 450 MB/s respectively, it significantly improves system responsiveness compared to traditional hard drives.
2. Energy efficiency:
- Low power consumption: The SSD is energy efficient and helps extend battery life on laptops, making it ideal for mobile devices.
3. Reliability:
- Error correction and protection: The SSD offers mechanisms such as ECC (Error-Correcting Code) to ensure data integrity and protect against data loss.
4. Noise level:
- Silent operation: Compared to mechanical hard drives, the SSD operates completely silently, which makes operation particularly pleasant.
5. Thermal management:
- Thermal protection technologies: The SSD is equipped with technologies that prevent overheating and keep performance stable under load.
6. Data management software:
- Toshiba SSD Utility: Toshiba offers software to monitor SSD performance, perform firmware updates and manage drive health. This software helps keep the SSD running optimally and detect potential problems early.
Scope
1. Desktop-Computer:
- Primary storage solution: The SSD can be used as the primary drive for operating systems and applications to improve overall system performance and reduce boot times.
2. Laptops and notebooks:
- Upgrade Solution: Ideal for laptops that require a performance boost and improved energy efficiency, the SSD can help reduce boot times and improve response times.
3. External storage solutions:
- External hard drives: By installing it in an external case, the SSD can be used as a portable and powerful external drive.
4. Backup solutions:
- Data Backup: SSD can be used to backup important data as it enables faster data backup and recovery compared to traditional hard drives.
5. Home office and small office applications:
- General purpose storage: Ideal for home office environments or small offices that need a reliable and fast storage solution.
Conclusion
The Toshiba THNSNJ128GDNU is a 128GB SATA III SSD that offers solid performance and reliability. With its 2.5-inch form factor, sequential read and write speeds of up to 550MB/s and 450MB/s, respectively, and the use of Toshiba NAND flash technology, it is a great choice for a wide range of applications. The SSD is particularly suitable for users looking for a cost-effective way to improve system performance, be it in desktop computers, laptops, or external storage solutions. Its energy efficiency, silent operation, and reliable performance make it an excellent option for everyday applications and smaller storage needs.
---
TOSHIBA THNSNJ128GDNU and the compatible operating systems
Windows Server 2025, 2022, 2019, 2016, ... or 2008 and higher
Windows 12, 11, 10 or Windows 7 and higher
Linux (various distributions)
macOS (from version 10.6)
Please note that the exact functions and areas of application may vary depending on the firmware version and configuration of TOSHIBA THNSNJ128GDNU.
The TOSHIBA THNSNJ128GDNU is a reliable disk in case of problems, failures, file loss and other errors, check the drivers of the TOSHIBA THNSNJ128GDNU regardless of whether it is under Windows 12, 11, 10, etc. or Linux and Apples macOS.